1、 Daily maintenance of metallographic inlay machine

Doing daily maintenance well and meticulously can reduce equipment failures, extend service life, and ensure usage accuracy. The specific requirements are divided into several aspects: neatness, cleanliness, and safety.

Neatness: The equipment is clean and there are no unnecessary items in the work area. The consumables, samples, and auxiliary tools used are clearly understood. Try to avoid interference during use.

Clean: The equipment needs to be in a dry and ventilated environment, avoiding direct sunlight, and used in damp and disorderly environments.

Safety: Operators need to undergo training to understand potential safety hazards and be familiar with emergency and first aid measures.

2、 The metallographic inlay machine needs to be inspected before use.

Before use, do not rush to inlay. Check the inlay machine for any residual inlay powder and other debris, and clean it in a timely manner. Be careful not to use tools that are too hard or too sharp, and do not use too much force to avoid damaging the equipment.

The metallographic inlaying machine with cooling function needs to check whether the water supply and drainage pipes are normal. After the inlaying heating operation starts, there is a risk of scalding when the body touches the drainage pipes.

3、 Pay attention to management when using the metallographic inlay machine.

When mounting metallographic samples, do not leave immediately. Pay attention to whether the equipment works normally. Do not leave until the equipment runs stably. During the entire operation period of the equipment, the user should try to take care of it as much as possible. Pay attention to any abnormalities in temperature and pressure.

4、 Pay attention to cleanliness after using the metallographic inlay machine.

After completing the inlay operation, pay attention to cleaning residual inlay powder and dust, and store auxiliary equipment and other items. Check whether the cooling water drainage is normal and no water splashes out. After the inlay is completed, the water and power supply can be cut off.

5、 The metallographic inlay machine is regularly cleaned and maintained.

The metallographic inlay machine is not easily damaged and can be wiped regularly with a clean cloth. Some inlay machines that need to be filled with lubricating oil and grease can be regularly filled with lubricating oil and grease.

6、 Contact the manufacturer for maintenance and repair.

If there is no dedicated person responsible and no maintenance training, you can contact the manufacturer, who will be responsible for maintenance.

7、 When the equipment status is abnormal, hang and post signs.

When the equipment is in a state of malfunction, major repair, etc., it is necessary to set up tags for suspension of use, maintenance, etc.

Welcome to the official website www.qmaxis.cn for technical exchange with QMAXIS engineers, or visit the QMAXIS testing laboratory in Nanjing for on-site testing.