When your sample is very small, when your sample is very precise, when your sample is very fragile, when your sample is super hard, are you worried? What kind of metallographic cutting machine should be used to cut the sample accurate to micron? Don't worry, Xiaobian laboratory has such a low-speed precision cutting machine imported from the United States, which can be called an artifact for cutting small and precise samples. It's very easy to use! This metallographic cutting machine is metcut-5 purchased by our laboratory two months ago. It is imported from the United States. It is flexible, easy to use and very beautiful. Let me show it to my friends.

Every time the sample is cut, it is fast and good, the knife edge is narrow and neat, and there will be no burr and other cutting defects. The most satisfactory thing is that the cutting section has almost no obvious deformation, and the subsequent grinding and polishing are very labor-saving.


In the process of use, Xiaobian summarized the characteristics that are different from the low-speed metallographic cutting machine previously used, including the following:


1、 There are many fixtures, complete cutting blade models and more comprehensive functions:

A variety of fixtures and accessories are available, as well as metallographic cutting pieces with different hardness, diameter and size. All samples in our laboratory can be easily handled.


2、 Motor power 100W, high cutting efficiency:


This low-speed metallographic cutting machine has 100W super power, which is many times higher than the motor power I used before, which is only 15W. The cutting ability is more powerful, and the sample cutting is simply too easy, and the speed is several times faster.


3、 60-600 revolutions, wide range of revolutions:


This low-speed precision metallographic cutting machine has a wide range of stepless speed regulation of 60-600 rpm, which is wider than the 300 rpm speed regulation range I used before. The cutting speed is relatively high, and it is suitable for cutting hard metallographic samples. There is no need to worry about cutting hard samples.

4、 Touch screen control panel is more intuitive and simple:


This low-speed precision metallographic cutting machine is controlled by LCD touch screen. Compared with the mechanical knob and key control panel before me, the parameters are intuitive, the operation is simple, convenient and more comfortable.


5、 Net weight 28KG, more stable:


The 28KG weight of this low-speed precision metallographic cutting machine is more than twice the 12kg weight I used before, and it is a body of rust proof aluminum structure, with more texture and a strong and durable feeling. Especially for this kind of high-speed rotating equipment, the stability is more important, and the running noise is very small, and the safety is better.


For the small, soft, brittle, irregular and precise materials in the laboratory, no matter metal materials, composite materials, plastics, electronic components, biological materials, ceramics, cement, rocks and minerals, or for cutting blocks, wires or thin sheets, it is easy to determine. This metallographic cutting machine can be called an artifact for cutting small and precise samples. It is very easy to use!