Metallographic polishing is inseparable from metallographic polishing fluid. It is common sense and consistent usage to shake it before use. Today, the editor of Kemai can give you a tip: Who said that metallographic polishing fluid must be shaken before use, adding it directly, the effect is excellent!

For non suspended metallographic polishing fluids, such as diamond polishing fluid, alumina polishing fluid, and silicon oxide polishing fluid, etc. The usual method of use is to manually shake and then drip, or place it in a homogenizer and shake thoroughly before drip.


Regardless of the method, it is not possible to determine with the naked eye whether the abrasive particles of this micron or even nanoscale metallographic polishing solution are uniformly distributed in the solvent. Moreover, in specific operations, different people, different forces, and different shaking methods will affect whether the distribution of abrasive particles is sufficient and uniform; Moreover, during the use process, the stationary time interval is random, making it difficult to ensure that the polishing solution maintains a consistent distribution of abrasive suspension in the solvent throughout the entire sample preparation process, which may result in inconsistent preparation results and affect the accuracy of sample detection data.

The application engineers of QMAXIS LLC (Kemai) in the United States have finally found a solution after a long and countless experiments and attempts. It is very simple to add a little bit to a non suspended metallographic polishing solution; Suspension agent; Okay, it can be used directly, and the metallographic polishing solution after using the suspension agent no longer needs to be used before use; You have to shake it&# quo; The abrasive is evenly distributed, the prepared samples have good consistency, and the batch quality is too efficient, with excellent results!


This polishing liquid suspension agent comes from QMAXIS in the United States and is available at Kemai Testing Nanjing Company. Teachers who have used it have said it is easy to use, and specific usage methods can be consulted with Kemai Testing's application engineers. Who said that the metallographic polishing solution needs to be shaken before use and added" Polishing fluid suspension agent; It can be used directly, and the effect is excellent. It's just that simple. This small innovation can solve the problem that has been troubling us for a long time. The problem is always the driving force of innovation, and innovation can make the development of the industry more vibrant.