As a metallographic engineer, I use metallographic sandpaper to start work and clock in every day. Batches of high carbon steel samples cry and wait for testing every day, and the moment the polishing machine starts working, I start the day's work.


Without comparison, I don't know. After using American QMAXIS metallographic sandpaper, I was not only amazed by; The gospel of grinding high carbon steel samples can be done in 2 minutes with QMAXIS metallographic sandpaper& Rdquo;

What does it mean? Let me help you with this. In the past, the average time for each grinding process of sandpaper was 3-4 minutes under normal circumstances, and often rework was required. Therefore, the preparation time would be longer. Since the use of QMAXIS sandpaper imported from the United States, under the same grinding conditions, each process has been reduced to an average of 2 minutes, and there is very little rework. QMAXIS sandpaper is indeed different from other sandpapers!

We prepared the samples using QMAXIS metallographic sandpaper and listened to the suggestions of the application engineer for pulse detection. We used a three-step grinding method, starting from P180 sandpaper, followed by P800 and P2500 in the second and third steps. The average grinding time for each step is 2 minutes, which can be achieved. The specific grinding method is shown in the table below:

Since this batch of QMAXIS metallographic sandpaper was put into use, the sample preparation time has significantly shortened. At the end of the day, we can finally take a break before work and have a cup of tea with peace of mind. If you are also preparing high carbon steel samples, you may want to try QMAXIS metallographic sandpaper. The application engineers of the pulse detection company in Nanjing provide full technical support, and they will help solve any difficulties encountered.

The gospel of using QMAXIS metallographic sandpaper to clock in and grind high carbon steel samples has arrived. It can be easily completed in 2 minutes. If you want to try it out, please contact a pulse testing engineer to improve work quality and efficiency.