Recall that the moment of collapse encountered during the sampling process using a metallographic cutting machine always arrived unexpectedly.

Just after the small sample block is cut, there is a need to switch to a device that specializes in cutting large samples; During the cutting process, the coolant splashes, causing the cutting to flow and contaminating the cutting chamber and workbench; A particularly eye-catching lump of impurities at the drainage outlet, greasy and crooked


Every day, several large and small sample pieces need to be cut, and it's really troublesome to replace and use large and small equipment in turns!


Also, thoroughly clean the metallographic cutting machine used that day once a day. What's even more frustrating is that after cleaning the cutting machine, you also need to clean the cloth and brush, which is really tiring and dirty!

There is a manual grinding wheel metallographic cutting machine with excellent detail design, which can take care of all the above issues. With it, small sample blocks and large sample blocks can be handled in one machine, and the entire process of cleaning the cutting room and workbench is not dirty, making it particularly easy to clean!


It comes from the well-known American MetLab, model METCUT-10, and is an economical and practical manual metallographic cutting machine. There are two options available: desktop and floor mounted, which can be selected according to the laboratory space structure and user work habits.


The cutting capacity is 90mm, and there are various models and specifications of fixtures available for selection. It can effectively hold large and small sample blocks with regular and irregular shapes. Additionally, various models of ultra-thin metallographic cutting pieces are matched to make the sample surface cut small, neat, with minimal material removal and surface deformation. Small and large sample blocks can be cut. One machine is versatile, powerful, and flexible to use. Usually, having such a metallographic cutting equipment in a metallographic laboratory is sufficient.

This metallographic cutting machine is equipped with a hose connected cleaning nozzle (as shown in the red circle above) on the cutting outdoor side, which can extend to any corner inside the cutting machine. The nozzle water pressure is adjustable, ensuring sufficient flushing of the cutting room and workbench. Impurities and dirt can be smoothly discharged through the drainage port with the water flow. Thoroughly cleaning the metallographic cutting machine once a day becomes very simple. Wherever the nozzle goes, all dirt can be discharged smoothly, without the need for a cloth or a small brush. The entire process is not dirty, making it easy to clean!

Since I started using this metallographic cutting machine, I no longer have to operate two devices every day, nor worry about cleaning the cutting machine once a day. Those frustrating moments are no longer unexpected, and I bid farewell to these troubles. Moreover, my work is efficient and sample making is easier!