A few days ago, I was at the Materials Laboratory of the University of Science and Technology, where I was embedding metallographic samples with my doctoral sister. I discovered a detail. There was a problem with the metallographic embedding machine I used at the time. When I opened the warehouse, I had trouble. My sister held the handle with both hands and tightened it vigorously, which was a lot of effort! I quickly assisted her in opening the cover of the inlay machine. She said that every time it's like this, it's even harder if there's no one around to assist.

I carefully checked and found out that her metallographic inlay machine is also imported, but it has been in use for many years and the model is quite old. The design of the lid switch is still mechanical, making it inconvenient to open, close, and lock the warehouse. The bigger problem is that the cooling is often not thorough, and if you don't pay attention, the sample inlay is completed. When opening the warehouse for sampling, it will burn your hand, which has become the norm. Therefore, after the sample inlay is completed, everyone will remind each other, Be particularly careful.


In response to these issues, the editor recommended to her the METPRESS A single cylinder fully automatic hot embedding machine from the United States for pulse detection. Due to its small details, it can solve the problem of laborious sampling and hot hands during warehouse opening. Answer that sentence; Extraordinary craftsmanship is evident in every detail&# quo;!

This METPRESS A single cylinder fully automatic hot pressing inlay machine from the United States is very simple to operate and adopts a very clever sliding cover design, which can open, close, and lock the warehouse with one hand. Every engineer who first sees this gold inlay machine can't help but try it out a few times and praise it. It doesn't need to be pulled or twisted, it can be easily opened or closed with just one pull, and the handle can be locked with just one turn. It's too convenient, labor-saving, and easy to use!

This metallographic inlay machine can be operated by holding the handle with one or both hands, gently turning it to the Open position, and then pushing it forward to open the compartment cover. Press the up button on the control panel, and when the bottom of the inlay cylinder rises to a height similar to the upper surface, gently place the embedded sample at the bottom of the inlay cylinder. Then, press the down button, and the inlay cylinder will automatically lower to the appropriate position. Then, add an appropriate amount of inlay material to the cylinder, pull the sliding cover back to its original position, lock it, set parameters, and start the start button to automatically inlay according to the predetermined program.

This metallographic inlay machine is more favored by beautiful engineers for its features of opening, closing, and locking the warehouse. It can complete all operations with one hand, which is really effortless! In addition, fast embedding speed and accurate temperature control are also highly favored. At the same time, embedding two samples can be completed in just 8 minutes; The temperature can be heated to 200 ℃, and the control panel displays the temperature in real-time; There are three options for water cooling: fast, medium, and slow. If it is not fully cooled to the set temperature, there will be a reminder when opening the warehouse to ensure safety and not burn small hands!

Is the metallographic inlay machine recommended by the editor very thoughtful? If you also feel good, let's have a metallographic inlay machine that doesn't need to be pulled, twisted, and opened in seconds. There is a prototype available in the Nanjing laboratory for pulse testing. Contact the engineers of the pulse testing company for consultation. Not only can you arrange to test the machine in the laboratory, but we can also offer you a more favorable price. Good after-sales service is a must.