It's approaching Double Eleven, and recently my colleagues have been discussing more about what to buy on Double Eleven every day. Everyone is planting grass with each other. Many friends who are engaged in metallographic sample making work, including myself, have also started asking me one after another, which metallographic consumables can you buy from Nanjing Kemai.


Guys who need to purchase metallographic sample making consumables, don't worry. Double Eleven is coming soon, but the editor of Mai is not good at anything else. There is really no one in the field of exploring useful metallographic sample making consumables. Today, the editor of Kemai will share with you several metallographic sample making consumables that engineers in Nanjing Kemai Laboratory cannot put down.


Cutting consumables for metallographic sample making: QMAXIS ultra-thin grinding wheel cutting blades from the United States

The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incisions, minimal damage, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 12.7mm: 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 32mm: 10in, 12in


Metallographic sample making consumables - inlay consumables: QMAXIS cold inlay resin and curing agent from the United States

Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes


Grinding and polishing consumables for metallographic sample preparation: QMAXIS metallographic polishing cloth from the United States

The original imported QMAXIS polishing fabric from the United States is made of high-quality polishing fabrics such as woven fabric, non-woven fabric, flocked fabric, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


With Double Eleven coming soon, haven't you figured out which metallographic sample consumables you need to purchase yet? Follow the purchasing strategy of metallographic sample making consumables that can be obtained without having to do it yourself with Kemai editor. Welcome to consult and learn!