The metallographic inlay machine belongs to the metallographic sample making equipment, which is equipped with eight different diameter inlay mold sets, including 25mm, 30mm, 40mm, 50mm, 1 inch, 1.25 inch, 1.5 inch, and 2 inch. Only one mold sleeve can be placed inside the device. If other specifications of mold sleeves are needed, they can be replaced.

  Because after embedding the sample, the inside of the embedding machine and the embedded sample will be very hot, and if naturally cooled, it will take a long time to wait. However, the METPRESS A, a fully automatic hot pressing inlay machine from Kemai Testing Home, does not have this issue. Because it is equipped with a water cooling device, when the inlay is completed, the inlay machine automatically enters a cooling and solidification state. At this point, just wait for a moment. After the sample has cooled down, a beep will sound to remind you that it has ended.

  METPRESS A single cylinder fully automatic hot pressing inlay machine can simultaneously embed 2 samples, can be heated to 200 ℃, and can be pressurized to 350 bar. The sample preparation speed is fast, programmable, and is very suitable for continuous and repeated preparation of standard sample blocks.

  Unique features:

  ★ Connect the power supply to preheat at 30-75 ℃, saving sample preparation time and improving work efficiency

  ★ The display screen displays the current temperature and pressure in real-time, and the embedding process is clear at a glance

  ★ The cooling modes are fast, medium, and slow, fully considering the diversity of prepared materials

  ★ When the cooling is not sufficient, there is a reminder function to continue cooling to prevent preparation errors and improve operational safety

  ★ Sliding cover opening and closing, labor-saving and convenient

  How to maintain the metallographic inlay machine:

  After each use, timely cleaning and maintenance work must be carried out. It is strictly prohibited to use corrosive liquids for cleaning.

  This automation of sample preparation equipment is very helpful for improving the working environment, improving work efficiency, enhancing the laboratory image, and optimizing the sample preparation process. There is no longer a need for personnel to be on duty.

  Alright, that's all for today's introduction and maintenance of the fully automatic hot pressing metallographic inlay machine METPRESS A! If you have any other questions about metallographic equipment or metallographic sample preparation, please visit the official website of QMAXIS www.qmaxis.cn for direct technical exchange with our metalworking team, or visit the QMAXIS testing laboratory in Nanjing for on-site testing.

Disclaimer: This article is only for technical discussion.